ATG Pharma

Setup time has been brought down to a minimum with the ML-1P. Simply, plug in, calibrate, and start filling your bottles and tinctures.

Setup time has been brought down to a minimum with the ML-1VF. Simply, plug in, calibrate, and start filling your cartridges.

Setup time has been brought down to a minimum with the ML-1VF. Simply, plug in, calibrate, and start filling your capsules.

Designed to optimize low-volume product filling (up to 5ml) for maximum efficiency, our RoboCAP RL-300 Volumetric (VF) utilizes backpressure, heat and volumetric displacement to guarantee a +/- 2% filling accuracy with the same speed and consistency as our other RoboCAP systems

Designed to optimize low-volume product filling (up to 5ml) for maximum efficiency, our RoboCAP RL-300 Volumetric (VF) utilizes backpressure, heat and volumetric displacement to guarantee a +/- 2% filling accuracy with the same speed and consistency as our other RoboCAP systemsClients can upgrade to 2 nozzles with our heating and mixing system and 4 nozzles without heating to meet every company’s production demands!

Bottle filling has never been easier with the RoboCAP RL-300 Peristaltic System. This pressure-less filling system fills your product with minimal product contact, making product change over rapid and cleaning easy.

Bottle filling has never been easier with the RoboCAP RL-300 Peristaltic System. This pressure-less filling system fills your product with minimal product contact, making product change over rapid and cleaning easy.Upgrade to 4 nozzles and pump system for higher production outputs with the broadest range of fill volume potential (15ml - 9,999ml)

Filling capsules has never been easier or more efficient thanks to the RoboCAP RL-300 Volumetric (VF) Nozzle. Designed to optimize low-volume product filling, the VF Nozzle dispenses product with a +/- 2% filling accuracy and the same speed and consistency as our other RoboCAP systems.

Filling capsules has never been easier or more efficient thanks to the RoboCAP RL-300 Volumetric (VF) Nozzle. Designed to optimize low-volume product filling, the VF Nozzle dispenses product with a +/- 2% filling accuracy and the same speed and consistency as our other RoboCAP systems.Upgradeable to 2 nozzles with our heating and mixing system, get started on optimizing your capsule production today!

The MonoBlox Product Suite consists of the MonoBlox, the MonoPress, and the MonoTray. This setup is ideal for filling & capping press top cartridges. The MonoBlox are custom cut for your cartridge sizes and are removable from the MonoTray so that the closing process can begin while the machine continues to fill. This eliminates any chance of leaking, clogging or oxidization.The system derives off of air pressure and is the perfect addition to your cartridge production line.